ALUMINIUM- Μ20000

Opening (turn-and-tilt) system with thermal break on aluminium designed to be equipped by steel hardware and circumferential lockings.

Cross – section (sash) width 70 mm.
Achieves thermal conductivity coefficient Uf 2,5 W/ m2K. Glass reinforced polyamides 20 – 24 mm thick are used for that purpose.
Glass units can be installed up to 46 mm thick. Glass panes with three glass sheets and thermal conductivity coefficient Ug up to 0,5 W/m2K can be used.
Equipped with steel hardware with circumferential lockings.
Special profiles, suitable for main entrance's manufacturing, are available.

ALUMINIUM- PRIME THERMO

Opening (turn-and-tilt) system with thermal break on aluminium equipped with steel hardware and circumferential lockings.

Sash width 61 mm.
Thermal insulation coefficient Uf 2,8 W/m2K. Glass reinforced polyamides 20-24mm thick are used for that.
Glazing panes with two glass sheets and thermal conductivity coefficient Ug up to 1,0 W/m2K.

ALUMINIUM- SUPREME- S600 Phos

Sliding system with thermal break on aluminium, specially designed for very big openings, that offers impressive specifications.

The frame and the sashes of the system are implemented into the floor, the ceiling and the walls.
There is no restriction regarding the maximum dimensions of the door; it can be as big as the selected glazing allows
High thermal conductivity coefficient Uf = 1,0 W/m2K.
Special locking hardware located on the meeting profile of the sashes and on the "hidden" frame.
Glazing pane consisting of three glass sheets with thermal conductivity coefficient Ug up to 0,5 W/m2K.
Heavy duty rollers capable of moving up to 300 kg

ALUMINIUM- SUPREME- S700

Lift-and-slide system with thermal break on aluminium specially designed for huge openings with impressive technical details.

Cross – section (sash) height 84 mm.
Reinforced aluminium profiles allow constructions of up to 3 meters in height to be manufactured.
High thermal conductivity coefficient Uf 2,8 W/m2K.
Glass reinfrorced polyamides 24 mm thick are used, not allowing the "banana" effect to appear.
Glazing pane consisting of three glass sheets with thermal conductivity Ug up to 0,5 W/m2K can be used.
Threshold that can be implemented to the floor.
Maximum weight of each sash 400 kg.

ALUMINIUM- SUPREME- S80

Opening (turn-and-tilt) system with thermal break on aluminium designed to achieve elegancy while the less possible aluminium profiles are visible.

Cross – section (sash) width 82,5 mm.
High thermal conductivity coefficient Uf 1,73 W/m2K. Glass reinforced polyamides 38 mm thick are used.
Glazing (glass panes with three glass sheets ) thick up to 46 mm with thermal conductivity coefficient Ug up to 0,5 W/m2K can be installed.
Rebates, transom and mullions profiles have all the same width: 67 mm.
Firm and sturdy constructions due to the 80 mm thick frame.

ALUMINIUM- SUPREME- S60

Opening (turn-and-tilt) system  highly efficient regarding the energy losses.

Cross – section (sash) width 84 mm

Suitable for "window wall" applications

Thermal break from glass reinforced polyamides 38 mm thick are used. If polyurethane bars are used, too, the system can achieve thermal conductivity coefficient Uf = 0,98 W/m2K.

Glass panes with three glass sheets and thermal conductivity coefficient Ug up to 0,5 W/m2K can be installed.

Typologies with hidden sash can also be manufactured.

ALUMINIUM-CURTAIN WALL- M6 SOLAR STANDARD ALUTHERM

Curtain wall system that emphasizes on thermal insulation, simplicity of installation and the improvement of the drainage system. Wide range of applications from the simplest ones to the most sophisticated inclined and curved applications.

Certified by the IFT ROSENHEIM institute. Achieved the highest ranking category in every test that underwent (wind pressure, air permeability, mechanical fatigue, thermal insulation, water permeability) and thermal conductivity coefficient Uf = 1,5 W/m2K.
Frame width 55 mm.

Capability of Structural Glazing with fixes glass units, with no visible aluminium profiles from the external
Glass unit consisting of three glass sheets with thermal conductivity coefficient Ug up to 0,5 W/m2K.
Wide range of applications, from the simplest ones to the most sophisticated inclined and curved applications and skylights, as well.
Available profiles that allow wide grids.
Parallel opening windows can be implemented on the construction. Doors from other Alumil series can be implemented, as well.

ALUMINIUM- CURTAIN WALL- M50 ENERGY

Curtain Wall system with visible pressure caps and special specification the use of the same cross – section vertically and horizontally.

Same profile for mullions, transoms and frames with visible width 50 mm.
'Straight' look internally
Cores from industrial steel profiles
Capability of Structural Glazing with fixed glass panes and no visible aluminium profiles from the external
Glass unit consisting of three glass sheets with thermal conductivity coefficient Ug up to 0,5 W/m2K can be used.
Thermal conductivity coefficient Uf from 1,0 to 1,8 W/m2K
Cerified by the IFT ROSENHEIM institute. Achieved the highest ranking category of every test that underwent (air pressure, air permeability, mechanical fatigue, thermal insulation, water permeability)